Memorex MVD2113, Руководство по обслуживанию

Страница: 15 / 116

DISASSEMBLY INSTRUCTIONS
B2-1
2. REMOVAL OF DVD DECK PARTS
2-1: TRAY (Refer to Fig. 2-1-A)
Set the Tray opened. (Refer to the DISC REMOVAL
METHOD AT NO POWER SUPPLY)
Unlock the support
1
and remove the Tray.
1.
2.
Fig. 2-1-A
Tray
Main Frame Ass'y
1
NOTE
1. In case of the Tray installation, install them as the
circled section of Fig. 2-1-B so that the each markers
are met.
2-2: MAIN CHASSIS ASS'Y (Refer to Fig. 2-2-A)
Remove the Main Chassis Ass'y from the Insulator (R).
Unlock the support
1
.
Remove the Main Chassis Ass'y.
1.
2.
3.
Fig. 2-2-A
Main Frame Ass'y
Main Chassis Ass'y
1
Tray
Main Frame Ass'y
Fig. 2-1-B
Insulator (R)
(Green)
NOTE
1. Do not disassemble the DVD DECK PARTS except
listed parts here. Minute adjustments are needed if the
disassemble is done. If the repair is needed except
listed parts, replace the DVD MECHA ASS'Y.
2-3:
2-4:
Remove the screw
1
.
Remove the Lever Switch.
Remove the 2 Insulator (R).
Press the Clamper and rotate the Clamper Plate
clockwise, then unlock the 3 supports
2
.
Remove the Clamper Plate, Clamper Magnet and
Clamper.
1.
2.
3.
4.
5.
Fig. 2-4-A
Press down the catcher
1
and slide the Rack Loading.
Remove the Rack Loading, Rack Loading Spring and
Main Gear.
Remove the Rack Loading, Rack L Spring and Main
Gear.
1.
2.
3.
Fig. 2-3
Main Gear
RACK LOADING/MAIN GEAR/ RACK LOADING
SPRING (Refer to Fig. 2-3)
1
Rack Loading
Rack Loading Spring
Main Frame Ass'y
CLAMPER ASS'Y/INSULATOR(R)/LEVER SWITCH
(Refer to Fig. 2-4-A)
Main Frame
Clamper Plate
Clamper Magnet
Clamper
1
Lever Switch
Insulator (R)
(Green)
2
2 2
Insulator (R)
(Green)
NOTE
1. In case of the Main Chassis Ass'y, install it from (1) to
(6) in order. (Refer to Fig. 2-2-B)
Fig. 2-2-B
Move it to the direction
of the arrow.
Main Chassis Ass'y
1
Check Lock
Rack Loading
2
3
4
5
6
Main Frame Ass'y
5
6
4
Rack L Spring