8
REMOTE CONTROL
BATTERY INSTALLATION
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
30˚ 30˚
20˚
20˚ (vertical)
Remote control signal sensor
6 m (20 feet) directly
in front of the unit
POWER
CLEAR
SUBTITLE
AUDIO
STEP
RANDOM
SLOW
STOP
REW
PREV.
F.F
NEXT
PAUSE
PLAY
A-B
REPEAT
DISC
MENU
RETURN
POP-UP
MENU
SEARCH
OPEN/CLOSE
A
B
C
D
HOME/SETUP
ANGLE
DISPLAY
TV RES.
NOTES:
• When there is an obstacle
between the Player and the
transmitter, the transmitter may
not operate.
• When
direct
sunlight,
an
incandescent
lamp,
fluorescent lamp or any other
strong light shines on the
REMOTE SENSOR of the
Player, the remote operation
may be unstable.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Caution – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
2. Use only the size and type of batteries specified.
3. Be sure to follow the correct polarity when installing the batteries as indicated in the Battery Compartment. A reversed
battery may cause damage to the device.
4. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with
fresh ones.
5. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible
battery leakage.
6. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer’s
directions.)
7. Remove batteries promptly if consumed.
8. Clean the battery contacts and also those of the device prior to battery installation.
+
+
–
–
1.
Remove the Battery Compartment cover by pushing in on the tab
and then lifting the cover off.
2. Install two (2) “AAA” batteries, paying attention to the polarity
diagram in the battery compartment.
3. Replace the Battery Compartment cover.