background image

11

ENGLISH

TROUBLESHOOTING GUIDE

Before requesting service, please refer to the following chart for the symptom and possible solution.

SYMPTOMS

POSSIBLE SOLUTIONS

• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.

• Station or CATV experiencing problems,

tune to another station.

• Check sound adjustments (Volume and Muting).
• Check for sources of possible interference.

• Station or CATV experiencing problems,

tune to another station.

• Make sure channels are set into memory.
• Check antenna or CATV connections, adjust

antenna.

• Check for sources of possible interference.
• Check picture control adjustments.
• Station or CATV experiencing problems,

tune to another station.

• Make sure channels are set into memory.
• Station is weak, adjust antenna to receive

desired station.

• Check for sources of possible interference.

• Station or CATV experiencing problems,

tune to another station.

• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or CATV connections, adjust

antenna.

• Check for sources of possible interference.
• Station or CATV experiencing problems,

tune to another station.

• Make sure channels are set into memory.
• CATV company is scrambling signal.
• Adjust antenna.

• Check all CATV connections.
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try

another station.

• Check antenna connections, adjust or

re-direct antenna.

• Check for sources of possible interference.

Poor sound
or No sound

Poor picture
or No picture

Horizontal or
diagonal bars
on screen

No Remote
operation

• Select proper language in the menu options.

Display is not
shown in your
language.

No reception
above
channel 13

No CATV
reception

• Batteries are weak, dead or inserted incorrectly.
• Remote is out of range, move closer to TV

(within 15 feet).

• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between

the Remote and the TV.

• Make sure the power cord is plugged in.

• Make sure TV/CATV menu option is in the

appropriate mode.

• If using antenna, check UHF antenna connections.

• No broadcast on station tuned.
• Sleep Timer is set.
• Power interrupted.

TV shuts off

• TV station experiencing problems or program

tuned is not closed captioned. Try another channel.

• Check CATV connection or VHF/UHF

antenna, reposition or rotate antenna.

• Press TV/CAP/TEXT button to turn on the

closed caption decoder.

Closed -
Caption is
not activated.

SYMPTOMS

POSSIBLE SOLUTIONS

TV does not
operate

Picture
wobbles or
drifts

Poor color or
no color

Poor
reception on
some
channels

SPECIFICATIONS

• Reset your password.

No reception

AC Power Input:
AC Power Consumption:
Chassis Construction:
Picture Tube:
Horizontal resolution:
Audio Power Output Rating:
Speaker:
Tuner Type:
Remote Control:
Receiving Channels:

Antenna Input Impedance:
 Input/Output:

Dimensions:
Weight:

120V, 60Hz
125 Watts
IC Solid state
27" (measured diagonally)
260 lines
2.5 + 2.5 Watts
2" x 3-1/2" Full Range, 8 ohm x 2
181 Channel, Quartz PLL Frequency Synthesized
Infrared, Direct  Access, 2 x AA batteries (not supplied)
VHF

2-13

UHF

14-69

CATV 01-97 (5A)-(A-3)

98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)

75 Ohm (VHF/UHF/CATV) Coaxial Input
S-Video

Y-Input : 1.0Vp-p/75 ohm
C-Input : 0.3Vp-p/75 ohm

Video:

In (RCA) 1.0Vp-p/75 ohm
Out (RCA) 1.0Vp-p/75 ohm

Audio:

In (RCA) –8dB/50K ohm
Out (RCA) –8dB/1K ohm

25-9/16" (W) x 19-11/16" (D) x 22-1/2" (H)
80.5 Ibs

Remote Control

ACCESSORY

  3L53901A-E

1/8/2002, 12:19

11

Содержание MT2272














Отзывы: