11
Changing the magnetic tensioner
You can remove the tension cone for cleaning.
►
Pull the knob (1).
►
Remove the tension cone (3) from the tensioner (2).
Servicing
MSF 3
Cleaning the yarn sensors
Only use the sensor cleaner 09-270-001 or the optional
cleaning brush 000-680-098 to clean the yarn sensors.
►
Switch off the unit (4).
►
Remove the yarn from the unit.
►
Push the sensor cleaner (6) or the cleaning brush (9)
between the winding reel (5) and the yarn sensors (7).
►
Using the cleaning brush (8), clean the outlet eyelet (9).
►
Wind the yarn on the unit.
►
Switch on the unit.
NOTE!
Do not use chemical cleaners for cleaning the
yarn sensors.
Cleaning the remaining parts of the
unit
►
Switch off the unit.
► Blow off any fibre dust or dirt with compressed air.
► Wash off the paraffin wax and other deposits with
spirits or with a soap solution.
►
Switch on the unit.
i
