Memmert IFE 400, Руководство по эксплуатации

Страница: 14 / 44

EXCELLENT page 14
Setting example “Normal operation“
The oven (UFE500) has to heat up to 180°C at a fan speed of 50%. The overtemperature monitor has to
operate at 200°C.
180°C
monitor temperature 200°C
°C
h
1. Select operating mode “Normal operation“
After holding down the SET key (approx. 3 sec), the current operating
mode is flashing. Select operating mode I with the push/turn control
while holding down the SET key.
After the SET key has been released the controller is in
operating mode I.
PRINT
SETUP
2. Select temperature setpoint
Hold down the SET key and use the push/turn control to select the
required temperature setpoint of
180
°C. After the SET key has been
released the oven briefly flashes the temperature setpoint. The display
then changes to the actual temperature and the controller starts to
control to the selected temperature setpoint of
180
°C. Heating is
indicated by the orange heater symbol.
˚C
3. Select fan speed
Turn the push/turn control clockwise until the fan symbol is flashing.
While holding down the SET key, use the push/turn control to set 50%
fan speed.
4. Select monitor temperature
Turn the push/turn control clockwise until the monitor temperature
display is flashing. Hold down the SET key and use the push/turn control
to set the monitor temperature to
200
°C.
MIN
AUTO
MAX
˚C