Memmert HCP Series, Инструкция по сборке стеллажа

Страница: 6 / 16

6
ICO/ICOmed/HCP stacking
D39166 | date 09/2019
3. ICO/ICOmed/HCP stacking
3.1 Preparations for mounting using a sub-frame
3.1.1 Remove the pre-assembled appliance feet.
►
If the lower appliance is mounted on a sub-frame, the pre-assembled
adjustable feet must be removed.
1. Lift the lower appliance onto the
electric manual pallet jack.
2. Lift the appliance.
3. Remove the pre-assembled
appliance feet from the lower
appliance.
3.1.2 Adjust the sub-frame.
►
The sub-frame must stand fi rm on the fl oor in a level position. Ensure
that the ground underneath it is suitable. (see page 4)
1. When you reach the installation site, pull out the adjustable feet on the sub-
frame.
NOTICE
NOTICE