Memmert CDP115 Скачать руководство пользователя страница 58

Страница: 58 / 64

06/2021

Attachment

8.1

CE declarations of conformity Shaking device SV1524 | SV3550

EC Declaration of Conformity

Manufacturer´s name and address:

Memmert GmbH + Co. KG

Äussere Rittersbacherstraße 38

D-91126 Schwabach

Deutschland

Authorized representative for

compiling the technical documents:

Memmert GmbH + Co.KG

Äußere Rittersbacher Straße 38

D-91126 Schwabach

Deutschland

Product:

Shaking device

Type:

SV…/1524/3550

Including all accessories

Nominal voltage:

AC 230 V 50/60 Hz, alternative AC 115 V 50/60 Hz

This product complies with the provisions of the directive

2006/42/EC

DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)

Full compliance with the standard below proves the conformity of the designated product with the essential

protection requirements of the above-mentioned EC Directive:

EN ISO 12100:2010

The designated product is in conformity with the European EMC-Directive

2014/30/EU

including amendments

Council Directive of 03 May 1989 on the approximation of the laws of the Member States relating to

electromagnetic compatibility

Full compliance with the standards listed below proves the conformity of the designated product with the essential

protection requirements of the above-mentioned EC Directive:

DIN EN 61326-1:213-07

EN 61326-1:2013

The object described in the declaration above corresponds to the directive 2011/65/EC of the European

Parliament and the Council of 8 June 2011on the restriction of the use of certain hazardous substances in

electrical and electronic equipment.

Schwabach, 04.06.2021

Legally binding signature of the issuer:

Christiane Riefler-Karpa, managing director

This declaration certifies compliance with the above mentioned directives but does not include a property assurance.

The safety note given in the product documentation which are part of the supply, must be observed.

D49191

Содержание CDP115

































































Результаты поиска

Содержание CDP115

Отзывы:

Похожие инструкции для CDP115

Бренды по названию

Популярные бренды

Memmert CDP115, Руководство по эксплуатации

Результаты поиска

Содержание CDP115

Отзывы:

Похожие инструкции для CDP115

Бренды по названию

Популярные бренды