Seite 3 von 20
Connecting the iCUBE
Make sure the printer is used with the mains cable suited to the requirements of the
electrical system of your country. The internal power supply in the printer is rated 115 to
240VAC, 50/60 Hz.
Insert the cable into the printer first. The cable connector should sit in the socket
securely.
Insert the cable into the mains socket.
CAUTION
Do not use an outlet that shares the same circuit with large electrical machines or appliances!
Turning Power On/Off
Powering Up:
Turn on the mains switch
Powering Down Printer:
1.
Press Main Power button on the top of the printer, and wait until the engine is
turned off.
2.
And turn off the machine with the mains switch.
OR
1.
Open the Toolbox and press ’Shutdown’.
