1-833-454-0864
1 7
LIGHTING INSTRUCTIONS
LIGHTING INSTRUCTIONS
1. Set your griddle on a sturdy flat surface and confirm that all Control knobs are in the
“OFF”
position. For outdoor
use only.
2. Select a burner control knob. Push in and turn the control knob counter-clockwise to the
“HI”
position. You will hear
a
“Click”
sound as the piezo starter is activated in the control knob. Confirm that the burner is lit before continuing.
3. Repeat step 2 to light the second burner. Confirm that
the burner is lit before performing a burn-off.
ATTENTION
If ignition fails, insert a BBQ lighter through the space between gridde and burner box assembly, as shown.
WARNING
Never stand with your head directly over the griddle
during lighting to prevent bodily injury. Multiple attempts
at lighting burners could result in a build-up of gas
causing flash flames. If you are having trouble lighting
the burners, refer to the troubleshooting section of this
manual (pg. 28-29)
ATTENTION
Following preheat, adjust control knobs for desired cooking temperature.
OFF
HI
LOW
OFF
HI
LOW
1. For outdoor use only.
2. Read instructions before lighting.
3. If ignition does not occur in 5 seconds, turn the burner
control(s) off, wait 5 minutes, and repeat the lighting procedure.
OFF
HI
LOW
OFF
HI
LOW
1. For outdoor use only.
2. Read instructions before lighting.
3. If ignition does not occur in 5 seconds, turn the burner
control(s) off, wait 5 minutes, and repeat the lighting procedure.
