1-833-454-0864
1 5
LEAK CHECK PROCEDURE
A leak test is used to determine the integrity of a seal. Before using your gas griddle, perform a leak test on the
connection between the regulator and the gas cylinder to reduce the risk of serious bodily injury or death from fire or
explosion.
A leak test should be performed:
•
Before starting your griddle for the first time,
•
Every time the gas cylinder has been changed,
•
After travel, especially over rough or bumpy roads,
•
After a prolonged period of storage or non-use.
HOW TO PERFORM A LEAK CHECK
1. Mix a solution of one part water, one part dish soap, in a spray bottle. The solution will be concentrated to make
bubbles.
2. Spray the solution onto the connection between the regulator and the gas cylinder and look for bubbles to form,
which will indicate a gas leak, defect or damage connection.
ATTENTION
•
Always perform and leak check outdoors in a well-ventilated area, away from ignition sources.
•
Ensure the griddle is cool to the touch and not in use.
•
Do not smoke during a leak test.
•
Do not use an open flame to check for gas leaks.
ATTENTION
If a leak was found, retighten and inspect connections. If a leak cannot be stopped, contact customer support
for a replacement part. MEMBER’S MARK BARBECUE SUPPORT 1-833-454-0864.
