Member's Mark 980305015, Инструкция по сборке и руководство пользователя

Страница: 11 / 40

1-833-454-0864
11
Shut Down Procedure
1. Push in and turn each control knob
CLOCKWISE
to the “
OFF
” position ( See image A ).
2. Turn LP Cylinder shut-off valve clockwise to close ( See image B ).
RESOLVING BURNER ISSUES
ATTENTION
Once lit, confirm that the burner is properly lit and that the flame pattern is as desired. If the flame pattern is
other than normal, consult the troubleshooting guide for corrective action.
LIGHTING INSTRUCTIONS
B
OFF
MAX
MIN
OFF
MAX
MIN
OFF
MAX MIN
OFF
MAX
MIN
OFF
MAX
MIN
A
Burner Flame Check
The burner flame pattern is the key indicator of proper or improper
function within the firebox. When the burners are performing correctly,
you will see a specific flame pattern. All burner ports should be
2.5cm/1” flame on “ MAX ” with orange tips, light blue center, with dark
blue flame at the base of the burner port
( See image C ). Refer to the troubleshooting steps.
Light the burners and rotate the knobs from “ MAX ” to “ MIN ”. You
should see a smaller flame in low position than seen on high. Perform
burner flame check by looking below the griddle top on the side of the
unit to view the burners below. Always check the flame before each
use. If there is a sudden drop or low flame issue, please refer to the
troubleshooting section.
MAX
MIN
C