Copyright © 2015, Melnor, Inc.
15043_INS_E_00
Zone1
Zone 2
Zone 3
Zone 4
Zone
Start Water
Water For (min)
Water Every
Eco Mode
A zone is what is watered from one of the timer outlets.
You can easily name Zones under Setup.
Select the Start Time of the first watering cycle of the day.
All watering cycles must be complete by 11:59 p.m.
How many minutes would you like to water?
How often do you want to water?
Once every 4 , 6, 8 or 12 hours -or-
Once every 1, 2, 3, 4, 5, 6 or 7 days?
Saves water by repeatedly opening and closing the
valve during the watering cycle, allowing more soak-in
and less run off. (ON/OFF)
TM
15043
1
2
3
4
Simple Program
Use this grid to determine your watering
needs before you begin programming.
16
The website will then prompt you to enter the
4-character serial number of your Valve Unit. The serial
number is printed on the bottom of the unit.
Press “Finish Registration”.
The website will take you
to the Home page.
During setup, It may
take a few minutes for all
information to be visible
on the home page.
18
The Valve Unit has four Zones or water outlets to attach
hoses. Each Zone can have its own watering program.
Tip:
You may want to leave one outlet unprogrammed
for everyday use with a hose and nozzle.
To enter a program, click “Edit” under the Zone you
want to program.
Remember, you can now log in to your account from
any smart phone, tablet or computer.
19
Watering programs can be either “Simple” or
“Advanced.” The grid below is to help you plan your
watering before you begin programming.
For “Advanced” programming, after clicking “Edit”,
change the Zone Editing Mode from “Simple” to
“Advanced.” This will provide additional
programming options.
17
Attach the Valve Unit to an outside faucet. Firmly
tighten the coupling nut. Do not overtighten.
Turn the faucet on and leave it
on while the timer is in place.
Attach a hose to each outlet you
want to use. You can then attach
sprinklers, soaker hoses or drip
style watering systems.
TM
15043
1
2
3
4
