•
Use the appliance in a well ventilated area.
•
Do not place the appliance on hot surfaces,
such as cooking plates, gas burners, ovens
or similar.
CAUTION:
In order to prevent overheating do not
cover the appliance.
•
Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it has
a leak.
•
Do not pull on the power cord to remove the
plug from the wall socket. Do not use the power
cord to lift, pull or carry the appliance.
•
Always use the appliance on an even surface.
•
Do not touch the plug, power cord or appliance
with wet hands.
•
Do not submerge the plug, power cord or
appliance in water or any other liquid.
•
Only use this appliance for its intended purpose
•
Only use the accessories provided with this
appliance. Using other accessories can cause
the appliance to malfunction. Do not touch the
evaporator while the appliance is in use.
OPERATING PROCEDURES & MAINTENANCE
UNPACKING YOUR ICE MAKER:
1. Remove the exterior and interior packaging.
Check if ice basket and ice scoop are inside. If any
parts are missing, please contact our customer
service department.
2. Remove the tape securing the ice shovel, ice
basket & ice scoop in place. Clean the
tank & ice basket.
3. Put the ice maker on a level counter top away from
direct sunlight or any other sources of heat.
4. Ensure that the unit has a 10cm space on all sides
from surrounding objects.
5. Allow the water to circulate through the product
until it indicates “ADD WATER”.
6. Empty all water and refill the product with fresh
clean water.
7. Only use cold water when using this product.
8. To get larger, more dense ice bullets, use
refrigerated cold water.
WARNING:
fill with fresh clean water only.
CONNECTING YOUR ICE MAKER:
*If the plug, power cord or appliance is damaged in
any way, please return the unit to the manufacturer
or their designated service agents to avoid the risk
of electric shock or injury.
1. This unit should only be used in a single standard
wall socket. Ensure that the plug fits securely and
correctly into the wall socket. Do not try to alter or
change the plug as this could be dangerous and
will render the warranty null & void.
2. This appliance requires a wall socket that is
capable of a supply of 220-240V, 50Hz.
CLEANING AND MAINTAINING YOUR ICE MAKER
Before using your ice maker, clean the appliance
thoroughly as explained in “OPERATING
PROCEDURES & MAINTENANCE”.
1. Take out the ice basket.
2. Clean the removable ice basket & ice shovel with
diluted detergent, warm water and a soft cloth.
Then rinse with clean warm water.
3. Use clean water to rinse the inside parts, and drain
out the water by removing the water drain cap on
the right front bottom corner of the base. Ensure
to pour the water out into a sink/basin and dispose
of the water correctly.
4. The outside of the ice maker should be cleaned
regularly with a mild detergent solution and warm
damp cloth. Rinse with a clean damp cloth.
5. Clean the water tank with water and a mild
detergent using a soft damp cloth, then rinse with
a clean soft damp cloth.
6. Dry the interior and exterior with a clean soft cloth.
7. When the product is no longer required for regular
use, drain all water & dry the interior.
USING YOUR ICE MAKER
1. Clean the unit following the instructions under the
“Cleaning and maintaining your ice maker” section
of this instruction manual. Open the cover, remove
the ice basket and pour water into the tank. Keep
water level below the “MAX” water level mark.
2. Press the “ON/OFF” button on the control panel to
begin the ice making cycle.
3. Select the ice cube size by pressing the
“SELECT” button. If the room temperature is
lower than 15 C, it is recommended that the small
ice cube setting is selected in order to avoid ice
bullets sticking together.
_IM.indd 3
5/22/2014 3:57:32 PM
Содержание ICE MASTER ICM001BKA
Страница 6: ..._IM indd 6 5 22 2014 3 57 33 PM...
