IMPORTANT SAFETY INSTRUCTIONS:
When using electrical appliances, the following safety
precautions should always be followed to reduce the risk
of electric shock, personal injury and fire. Read all these
instructions carefully before using, and save for future
reference or new users.
1.
Referring to the enclosed illustration, read these
instructions carefully before using the kettle for the
first time;
2.
Before using the kettle, make sure whether the
voltage indicated on the kettle corresponds with the
mains voltage in your home. If not, do not use it;
3.
Please place the kettle on a stable flat surface
to avoid any accident or possible damage to the
kettle;
4.
Be sure to fill the kettle first, then connect it to the
power;
5.
Keep the power plug connecting to an earthed wall
socket while using the kettle;
6.
Be sure to close the lid on the kettle well;
7.
The automatic safety cut-off will protect the kettle
from any damage causing by over heated
8.
If the kettle runs dry while operating, first remove
the power plug from the wall socket, then pour
in appropriate water to cool the heating element
down, The safety cut-off will reset by itself.
9.
Pour away the very first water boiled with this kettle,
the appliance then is ready for use.
WARNING:
1.
The product is only used for heating water;
2.
Do not fill the kettle over its MAX capacity as the
boiling water may be ejected;
3.
The cordless kettle can only work with its equipped
power base;
4.
The power can be connected only through on/off
switch(B),i.e. while the on/off switch is under “I”
status, connecting the power or placing the kettle
body on the power base is not permitted;
5.
Keep children and patients away or not let them use
the kettle;
6.
To ensure safety, do not hang up the power cord on
the side of table or other similar place;
7.
Never immerse the kettle in water to allow water to
erode the electrical components inside the kettle.
Detailed instruction refer to the following “Cleaning
& Descaling”;
8.
If power cord provided is damaged, return it to our
manufacturer or our service personnel;
USING METHOD:
1. Filling
– Open the lid and fill the kettle;
– Fill water between “MIN” and “MAX” indicated on
the water level gauge;
– Close the lid well;
2. Switching On
– Insert the power plug into the earthed wall socket
corresponding with the kettle’s requirements;
– Press the on/off switch to “on”(marks “I”), then the
indicator lamp will light up, which means the kettle
is under working;
3 Switching Off
–The kettle can automatically switch off when water
has boiled, at the same time, the indicator lamp
will go out, and the on/off switch will go back to
“off”(marks “0”)position;
–Switching off the kettle at any time manually is
allowed, that is, you can directly press the on/off
switch to “off”(marks “0”)position
Attention:
DO NOT FORCE THE “ON/OFF”SWITCH BACK TO
“ON”(MARKS “I”) POSITION WHEN IT SWITCH
OFF AUTOMATICALLY AS IT WILL DO GRAVE
DAMAGES TO THE KETTLE.
Description
A Handgrip
B Water Level Gauge
C On/Off Switch
D Indicator Lamp
E Power Base
F Kettle Body
G Spout (with removable Filter)
H Lid
INSTRUCTIONS FOR USE:
