SwitchX Switch EVB Hardware User Manual
Rev 1.5
Mellanox Technologies
49
1. Unplug and remove all connectors.
2. Unplug all power cords.
3. Remove the ground wire.
4. Unscrew the 2 bolts from the side of the switch with the bracket.
5. Slide the switch from the rack.
6. Remove the rail slides from the rack.
7. Remove the eight caged nuts.
5.9
Disposal
Follow the instructions found in the Mellanox Web site at
for proper instructions
to disassemble and dispose of the Switch according to the WEEE directive.
5.10
Resetting the Switch
Should the switch stop working, try resetting the switch. On the connector side panel under the
system LEDs is a reset button. This reset button requires a tool to be pressed.
Figure 36: Reset Button
This button resets the switch when the button is pushed. A quick push of this button resets the
whole switch.When the button is held down for 15 seconds the switch is reset and the password
is deleted. The LEDs will flicker for a fraction of a second to indicate reset is occurring. You will
then be able to enter without a password and make a new password for the user admin.
Support the weight of the switch when you remove the screws so that the switch does
not fall.
According to the WEEE Directive 2002/96/EC, all waste electrical and electronic
equipment (EEE) should be collected separately and not disposed of with regular
household waste.
Dispose of this product and all of its parts in a responsible and environmentally
friendly way.
RST
UID
PS1
1
2
3
Press the rest button.
