SwitchX Switch EVB Hardware User Manual
Rev 1.5
Mellanox Technologies
17
Figure 5: Power, Fan, and System LEDs
4.1.1.2 Power Side Panel System LED
On the right side of the power side panel is a single system LED that displays the health of the
switch. This indicator is the same as the system status indicator on the other side of the switch.
The LED assignment is as in Table 2.
Figure 6: System Health LED
4.1.1.3 Port Connector LED Assignment
Above the ports are two LEDs one for the upper port
and one for the lower port
. The fol-
lowing table shows the port status according to the LED indication.
Table 2 - System Status LED Configurations
LED Configuration
STATUS/ System Health LED
Solid Green
OK – The system is up and running.
Flashing Green
The system is booting up.
Solid Yellow
Error – A fault in the system, most likely
the firmware did not BOOT properly.
Solid Red
Major Error – Possible damage can result to the switch. Turn off immediately.
e.g. bad firmware, can’t boot, overheated
Off
Off – The system has no power.
RST
UID
PS1
OK
This is a three color ED
Green — OK
Yellow — Fault in the system
Red — Major fault
