Operation
52
SM: Indicates the subnet management functionality: on for active mode, blinking for
standby mode.
PS/FAN: Lights solid green, indicating that the Grid Director 4036E is properly
powered and the fan unit is functioning adequately.
I/O LED: Indicates that the Ethernet gateway is functional.
Led State
Indication
Comment
Slow blink
System initializing
Blinking frequency: ~1 Hz
On
System OK
Takes about 2 minutes from reset/power up
Fast blink
System fault
If some of these conditions are not met, refer to
Solving Startup Problems
(on page
53
) to
isolate and, if possible, resolve the problem.
8.3
Where to Go Next
Once you have installed the 4036E hardware, you can start the system configuration. To
configure the system, refer to the Grid Director 4036E User Manual.
Chapter 10
