manualshive.com logo in svg

Mellanox Technologies ConnectX MHQH19-XSC, Руководство пользователя

Поделиться
Скачать
Mellanox Technologies ConnectX MHQH19-XSC Скачать руководство пользователя страница 23

Rev 1.5

Mellanox Technologies

23

3

Driver Software and Firmware

3.1

Driver Software

3.1.1 Linux

For Linux, download and install the latest OpenFabrics Enterprise Distribution (OFED) software 
package available via the Mellanox Web site at: 

 

http://www.mellanox.com

 => Support > Download Center. Follow the installation instructions 

included in the download package.

3.1.2 Windows

For Windows, download and install the latest Mellanox WinOF VPI for Windows software pack-
age available via the Mellanox Web site at:   

http://www.mellanox.com

 => Support > Download 

Center. Follow the installation instructions included in the download package. 

3.2

FlexBoot 

FlexBoot enables remote boot over Ethernet or InfiniBand using Boot over InfiniBand (BoIB), 
Boot over Ethernet (BoE), or Boot over iSCSI (Bo-iSCSI). This technology is based on the Pre-
boot Execution Environment (PXE) standard specification, and FlexBoot software is based on the 
open source EtherBoot/gPXE project (see www.etherboot.org). For more information go to 

 

http://www.mellanox.com

 => Support > Download Center.

3.3

NVIDIA GPUDirect Support 

Utilizing the high computational power of the Graphics Processing Unit (GPU), the GPU-to-GPU 
method has proven valuable in various areas of science and technology. Mellanox ConnectX-2 
based HCA provides the required high throughput and low latency for GPU-to-GPU communica-
tions. 

3.3.1 Hardware and Software Requirements

Software:

Operating Systems:

• RHEL5.4 2.6.18-164.el5 x86_64 or later

• Mellanox OFED with GPUDirect support

• NVIDIA Development Driver for Linux version 195.36.15 or later

Hardware:

• Mellanox ConnectX-2 HCA card

• NVIDIA Tesla series

Содержание ConnectX MHQH19-XSC



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды