Rev 1.9
Mellanox Technologies
8
About this Manual
This
User Manual
describes Mellanox Technologies ConnectX®-3 10 Gigabit Ethernet Single
and Dual SFP+ Port PCI Express x4 Mezzanine cards. It provides details as to the interfaces of
the board, specifications, required software and firmware for operating the board, and relevant
documentation.
Intended Audience
This manual is intended for the installer and user of these cards.
The manual assumes basic familiarity with Ethernet networks and architecture specifications.
Related Documentation
Table 2 -
Mellanox Firmware Tools (MFT) User
Manual
Document no. 2204UG
IEEE Std 802.3 Specification
Documents List
Online Resources
•
Mellanox Technologies web pages:
http://www.mellanox.com
•
Mellanox Technologies Firmware download web page:
http://www.mellanox.com
=> Support => Download Center
Document Conventions
When discussing memory sizes, MB and MBytes are used in this document to mean size in mega
bytes. The use of Mb or Mbits (small b) indicates size in mega bits.
Technical Support
Customers who purchased Mellanox products directly from Mellanox are invited to contact us
through the following methods.
•
URL:
http://www.mellanox.com
=> Support
•
E-mail:
•
Tel: +1.408.916.0055
Customers who purchased Mellanox M-1 Global Support Services, please see your contract for
details regarding Technical Support.
User Manual describing the set of MFT firmware management
tools for a single node.
See
http://www.mellanox.com
=> Support => Download Firm-
ware Tools
This is the IEEE Ethernet specification
http://standards.ieee.org/getieee802
PCI Express 3.0 Specifications
Industry Standard PCI Express 3.0 Base and Card Electromechan-
ical Specifications
