Melitta Cafina XT8-F, Руководство по эксплуатации, Страница: 33 / 36

5. Put a cleaning tablet (1) into the coffee urn.
6. Re-fit the lid.
͵
Insert the lid at the rear first.
7. Press the “OK” button to confirm that the cleaning
tablet has been added.
͵
The machine starts the automatic cleaning pro-
cess.
͵
The cleaning process takes a few minutes.
Note
The touch screen can be cleaned while the
cleaning program is running without the need
to deactivate the display for inputs beforehand
(see also chapter 8.8 on page 33).
The machine is then switched off or, depending on the
selection, it goes back to operational readiness mode.
8�7�3 Final activities
1. Remove the splash protection pipe from under the
quantity outlet.
2. Clean the dispensing area once the automatic
cleaning process is complete (see chapter 8.9 on
page 34).
9
The cleaning is complete.
8�8 Cleaning the touch screen
Cleaning is required if there is any visible dirt.
1. On the display, press the menu symbol “
≡
” (1) (see
Fig. 40) and then “Cleaning”.
͵ In self-service operation, you must first log in with
a user chip key (see chapter 5.1.4 on page 9).
2. Press the “Clean touch screen” button.
͵ The display is now blocked for inputs.
3. Clean the screen with a microfiber cloth or a damp
cloth.
͵ If you use a damp cloth, make sure that the touch
screen is completely dry and free of streaks be-
fore you continue using the unit.
4. After cleaning, enable the display for inputs again
by touching the numbers 1-4 in the corners of the
display.
000304
Fig. 43: Cleaning the touch screen
9
The cleaning of the touch screen is complete.
Cleaning
33
32743 • 20190801
8