KEY
1. Start/stop button and speed selector
2. Release button
3. Hand mixer
4. Mixing bowl
5. Stand
6. Whisk
7. Dough hook
PRIOR TO FIRST USE
• Remove all packaging from the hand
mixer and mixing bowl. Place the hand
mixer (5) on a flat, stable surface, e.g. a
kitchen table. If preferred, the stand can
be screwed permanently to the kitchen
table using the two holes on the bottom
of the stand.
• Plug in. Check that the speed selector on
the hand mixer (3) is set to position 0,
and switch the current on.
USE WITHOUT THE STAND
• Place the required mixing or whisking
tools (6 or 7) in the holes on the bottom
of the hand mixer (3). You may need to
turn the tools slightly before they fit
correctly. Always use the same type of
tool in both holes.
• Switch on the hand mixer and select the
required speed using the combined
start/stop button and the speed selector
(1).
• After use, switch the hand mixer off using
the start/stop button. Remove the mixing
and whisking tools by pressing the
release button (2) on the handle. The
tools automatically pop out of the holes.
USE WITH STAND
• Place the mixing bowl (4) on the round
disk at the front of the stand (5). If
necessary, flip the top part of the stand
up by pressing the fluted area on the rear
of the stand so the bowl can be placed in
position (8). Flip the top part down.
• Fit the hand mixer (3) on the stand by
placing the front of the hand mixer
securely in the front of the top part of the
stand and then lower the rear of the hand
mixer so that it fits securely.
• Press the fluted area on the rear of the
stand and flip the top part of the hand
mixer up.
• Place the required mixing or whisking
tools (6 or 7) in the holes on the bottom
of the hand mixer (3). You may need to
turn the tools slightly before they fit
correctly. Always use the same type of
tool in both holes.
• Important! Of the two utensils, the one
with four blades should be placed in
the hole on the right of the hand mixer
as seen from the front. If this is not
done, the mixing bowl will not turn.
• Flip the top part of the hand mixer down
so that it fits securely
15
4
7
5
6
3
2
1
8
GTM-9488B_IM2 25/05/04 14:57 Side 15