20
UK
USE
1. Fully unroll the cord and plug in the appli-
ance.
2. Switch on the appliance by pushing the
on/off button (5) to “ON”. The indicator
light (4) will be lit.
3 Wait until the cylinder (2) has reached the
required temperature, before using the
appliance.
4. Use the appliance to set your hair as
desired.
5. Turn off the appliance by pushing the
ON/OFF button to the “OFF” position when
you have finished using it.
6. Always remove plug from the mains
socket, and allow the appliance to cool
down before cleaning or storage.
Note! If you put the appliance down, it must
rest on the base (8).
STYLING TIPS
•
First wash your hair and then blowdry
until it is almost dry. Brush your hair using
a styling brush. Divide your hair up into
small sections, and deal with them sepa-
rately piece by piece as described below
until the desired result is achieved. To help
separate locks of hair, use clips and style
a small area at a time.
1. Start with a lock of hair about 5 cm wide,
open the clip (3) by pressing down the
handle. Position the appliance about half-
way down the lock of hair.
2. Distribute the hair evenly across the cylin-
der (2) and close the clip carefully to trap
the hair.
3. Gently pull the appliance down towards
the hair ends.
4. Make sure that the ends of your hair are
trapped securely under the clip. Then wind
the lock of hair around the cylinder up
towards the scalp. Be careful not to allow
the hot cylinder to come into contact with
your scalp.
5. Hold the appliance there for 5-8 seconds,
depending on the length and thickness of
your hair. Do not allow the appliance to
heat an area for too long as this can dam-
age your hair.
6. Open the clip and withdraw the appliance
from your hair.
7. Allow hair to cool before setting.
CLEANING
When cleaning the appliance, you should pay
attention to the following:
• Remove the plug from the mains socket,
and allow the appliance to cool down
completely before cleaning it.
•
Do not submerge the appliance in water,
and do not let water enter the appliance.
•
Clean the apparatus by wiping it with a
damp cloth. A little detergent can be added
if the appliance is heavily soiled.
•
Do not use scouring pads, steel wool or
any form of strong solvents or abrasive
cleaning agents to clean the appliance, as
they can damage the external surfaces of
the appliance.
•
IMPORTANT! Allow to dry completely after
cleaning. Do not use the appliance if it is
damp.
