
14
20
KEY TO THE MAIN COMPONENTS OF THE
APPLIANCE
1. Upper heating element
2. Temperature control
3. Function selector
4. Timer
5. Indicator light
6. Lower heating element
7. Baking tray
8. Grid
9. Handle
10. Oven door
A handle for inserting/removing the roasting dish and
grid (not shown) is supplied.
Function selector settings
PREPARING THE APPLIANCE
Each individual appliance is checked at the factory, but
for safety’s sake, after unpacking it, you should check
carefully that it has not been damaged during transport.
• Check whether there is any visible damage (e.g. in
the form of dents or similar), if the door (10) closes
properly, and if the hinges are in order.
• If the appliance appears to have been damaged,
contact the shop where you bought it, and do not
use it until it has been checked by an authorised
specialist.
• Before use, check that you have removed all
packaging inside and out.
• Wash and wipe the baking tray (7) and the grid (8)
before use.
The heating elements were oiled during manufacture
and these will therefore smoke slightly when the oven
is first used. This is entirely harmless and will stop after
a few minutes. However, so that the food does not
taste of this smoke, we recommend that you take the
following action before using the appliance for the first
time:
• Place the baking tray and the grid in the appliance.
• Select upper or lower heat, set the temperature at
“Operating the Appliance” below). The appliance
starts automatically.
• The appliance automatically switches off after 10
minutes.
The smoke will now have completely disappeared, and
you can use the appliance to cook food.
USING THE APPARATUS
1. Plug in and switch on the power.
2. Place the food in the oven (unless the oven has to
preheat).
3. Close the oven door.
4. Use the function selector (3) to choose the desired
function (see the above table with function selector
settings). The appliance has three settings:
o Heat from above
o Heat from below
o Heat from above and below
5. Turn the temperature control (2) clockwise to the
desired oven temperature. The temperature can be
6. Turn the timer (4) clockwise to the desired
preparation time. The timer can be set at 0-60
minutes.
o The oven switches on when the timer is
activated. At the same time, the indicator light
(5) is lit and remains lit as long as the appliance
is switched on.
o If the desired preparation time is less than 5
minutes, initially turn the timer past this setting
and then back to the 5 minutes.
7. At the end of the preparation time, a bell rings, and
the appliance automatically switches off.
o You can switch the appliance off manually during
preparation by turning the timer anti-clockwise
CLEANING
When cleaning the appliance, you should pay attention
to the following points:
• Remove plug from the mains socket, and allow the
appliance to cool down before cleaning it.
• Never submerge the appliance in water and make
sure no water enters the appliance.
• Clean the appliance by wiping it with a damp cloth.
A little detergent can be added if the appliance is
heavily soiled.
Symbol
Function
Used for
OFF (OFF)
Upper heating
element (1) active
Lower heating
element (6) active
Both heating
elements active
Oven switched off
Baking and grilling
with upper heating
Baking and
roasting with lower
heating
Baking and
roasting with upper
and lower heating
1
2
3
4
5
6
7
8
9
10
230 ºC and set the cooking time for 10 minutes (See
230ºC.
set at low-
to the "
" position.