20
UK
USE
• Place the appliance on a level sur-
face.
• Coat the hotplates with a small
amount of vegetable oil. Vegetable oil
can be applied with kitchen roll.
• Plug in. The red indicator light comes
on and the appliance begins to heat
up.
• When the green indicator light comes
on, the appliance has reached the
correct temperature and is ready for
use.
• Now carefully place an 8 inch tortilla
on the bottom hotplate. Be very care-
ful, as the hotplates will be extremely
hot!
• Lock the handle by clipping the lock-
ing latch (1) on the top section to the
bottom section of the handle.
• Both hotplates on the appliance are
heated, which reduces the cooking
time.
• The tortilla is ready after approxi-
mately 1-3 minutes, depending on its
thickness and browning level.
• If you want the tortilla to be more
golden, you should toast it a little
longer.
• You can stop the cooking process at
any time by removing the plug from
the socket.
• Once the tortilla is ready, open the
appliance carefully.
• Carefully release the tortilla using a
heat-resistant plastic spatula or simi-
lar. You must not use metal utensils
or utensils with a sharp edge on the
hotplates, as these have a special
non-stick coating. Instead use plastic,
melamine or wooden utensils.
• Close the lid and unplug the appli-
ance once you have finished using it.
• Before cleaning and storing the
appliance, make sure it has cooled
completely.
CLEANING
Unless clearly specified in the below
cleaning instructions, please note that
none of the parts of this appliance are
dishwasher safe.
Before cleaning, remove the plug from
the wall socket and allow the appliance to
cool down with the lid open.
For reasons of electrical safety, never use
water or any other kind of liquid on the
appliance nor immerse it.
Clean the outside of the appliance by wip-
ing with a damp cloth.
The non-stick coated plates can be
cleaned with a damp cloth or a soft brush.
FOR UNITED KINGDOM ONLY
Plug wiring:
This product is fitted with a BS 1363 13-
amp plug. If you have to replace the fuse,
only those that are ASTA or BSI approved
to BS1362 and with a rated current of 13
amps should be used. If there is a fuse
cover fitted, this cover must be refitted
after changing the fuse.
If the fuse cover is lost or damaged, the
plug must not be used. You must also
check if the socket outlets in your home fit
with the plug of the appliance.
If the socket outlet in your home does
not fit with the plug, the plug must be
removed and disposed of safely as inser-
tion of the plug into the socket is likely to
cause electric hazard. A replacement plug
should be wired according to following
description.
