MELINERA HG01313-BS, Инструкции по эксплуатации и безопасности

Страница: 9 / 11

9 GB/IE/NI
plate
1
, make sure to position the space of
the pipe exactly where the spike
2
is fixed
with the screw.
Further steps for both types of
installation:
Attach stand pipe
5
to base plate
1
and
tighten Hexagon screw
6
with the help of
Hexagon key
4
(see fig. B).
Attach LED tree
8
to stand pipe
5
and tighten
Hexagon screw
6
with the help of Hexagon
key
4
(see fig. C).
Bend the individual branches of the LED tree
8
to the desired shape (see fig. D).
Plug the connector plug of lead wire into plug-in
power supply and tighten the screw connection,
in order to prevent moisture from penetrating
inside. Then plug the power adaptor
3
into a
socket (see fig. E).
Use the velcro cable ties
10
to secure the lead
wire along the pipe (see fig. F).
Timer function
To switch on the timer function, press the timer
button
9
after the product is connected to the
socket of power supply. The timer button
9
will light up when the timer function is activated.
The LED tree
8
glows permanently for 6 hours
and will be followed by a subsequent pause of
18 hours. Afterwards, the LED tree
8
will light
up again at its designated turn on time for 6 hours
followed by a subsequent pause of 18 hours.
To switch off the timer function, press the timer
button
9
again and the light of the timer but-
ton
9
will be turned off.
When the timer function is switched off, the
LED tree
8
glows continuously. To turn off the
product completely, the power adaptor
3
has
to be unplugged from the power socket.
Cleaning and care
DANGER OF ELECTRIC
SHOCK! First pull the power adaptor
3
out of
the mains socket.
DANGER OF ELECTRIC
SHOCK! For reasons of electrical safety the
product must never be cleaned with water or other
liquids or immersed in water.
Do not use any solvents, petrol or similar items.
This would damage the product.
Only a dry, lint-free cloth should be used for
cleaning.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.