MELINERA 295687, Инструкции по эксплуатации и безопасности

Страница: 10 / 79

11 GB
temperaturedependent). A vertical angle of light at temperatures
above the freezing point is ideal. The rechargeable battery
9
will
only achieve its maximum capacity after several charging and
discharging cycles.
Start-up
Mounting the product
Note: Remove the protective film from solar cell before use.
Install the product in accordance with figure A.
Rotate the solar cell housing
2
counter-clockwise out of the
lamp shade
3
(see fig. A).
To switch on, set the ON / OFF switch
7
to the “ON“ position,
so the product turns on during darkness (see fig. B).
Insert the solar cell housing
2
into the lamp shade
3
and
tighten by turning clockwise (see fig. A).
Your product is now ready for use. You must now decide whether
you want to use your product as a hanging lamp or a floor lamp.
Usage as a floor lamp:
Insert the rod
4
into the lamp shade
3
and insert the ground
stake
5
into the rod
4
(see fig. A). At delivery, take note of
whether the ground stake
5
is inserted into the rod
4
with
the spike. Remove, if necessary, the hanger
1
from the lamp
shade
3
, by slightly bending the handle outwards.