9
GB/IE/NI
Installation
Only for HG02837 (star):
Bend the two wire elements carefully out from
one another then insert the fixture
4
(see fig).
Alternatively, you may hang up the 3D rope
light figure
1
with the provided hook
5
.
For all models:
Place the 3D rope light figure
1
on a stable
substrate.
For outdoor installation, if possible fix the 3D
rope light figure
1
in place with the ground
spikes
3
and the cable ties
7
.
Check the stability of the 3D rope light figure
1
.
For indoor installation, place the 3D rope light
figure
1
on an even surface and fix it with the
cable ties
7
if possible. Otherwise, the product
may not stand stable.
Use
Plug the mains plug
2
into the socket. The
product is switched on.
To turn the lighting off, remove the mains plug
2
from the socket.
Timer function
To switch on the timer function, press the timer
button
6
after the product is connected to the
socket of power supply. The timer button
6
will
light up when the timer function is activated.
The product lights glow permanently for 6 hours
and will be followed by a subsequent pause of
18 hours. Afterwards, the product will light up
again at its designated turn on time for 6 hours
followed by a subsequent pause of 18 hours.
To switch off the timer function, press the timer
button
6
again and the light of the timer but-
ton
6
will be turned off.
Cleaning and care
CAUTION! RISK OF ELECTRIC SHOCK!
First remove the mains plug
2
from the socket.
CAUTION! RISK OF ELECTRIC SHOCK!
For reasons of electrical safety the product must
never be cleaned with water or other liquids or
immersed in water.
Let the product cool before you clean it. Risk
of injury!
Do not use any solvents, petrol or similar items.
This would damage the product.
Only a dry, lint-free cloth should be used for
cleaning.
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities. The Green
Dot is not valid for Germany.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal author-
ity for more details of how to dispose of
your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.