MELICONI AD Professional, Инструкция пользователя

Страница: 6 / 31

4
C
D
If the quality of the image is poor, proceed as follows to improve reception:
- Adjust the gain by moving the selector on one side of the antenna.
- Change the position of the antenna.
- Change the horizontal/vertical orientation of the antenna until the reception improves.
Improving the reception
- If the antenna is not working make sure it is powered up correctly.
- The power supply function using the antenna cable may be temporarily disabled on your
decoder. If this is the case, follow the instructions on your decoder to enable this function or
connect the antenna to the power supply unit supplied.
Troubleshooting
This symbol shown on the product or packaging indicates that the product must not be considered
as standard domestic waste. For disposal the product must be taken to a specialist electric and
electronic waste disposal centre. Failure to dispose of this product in the appropriate way may have
negative effects. For further information concerning recycling of this product contact you local council
of
fi ces, local waste disposal agency or the shop where you purchased the product.
2 YEAR WARRANTY - The warranty is declared null and void if the product is tampered with
or used improperly.
FEATURES AND TECHNICAL SPECIFICATIONS
- Indoor ampli fi ed digital antenna
- Reception of digital terrestrial TV signals (DVB-T), DAB radio signals and analogue TV
signals on UHF and VHF (band III) bands.
- Reception range: VHF + UHF (174 ~ 790 MHz)
- FM radio + 4G LTE interference
fi lter
- Very low noise emission ampli fi er (< 1 dB)
- Antenna ampli fi cation adjustment up to 47dB
PACKAGE CONTENTS
- Antenna
- Instruction
booklet
- Antenna support
- IEC-male to IEC-male coaxial cable
- AC/DC power supply unit
WARNINGS
- Keep away from water: the antenna must not be exposed to drips or water spray.
Do not use in a damp atmosphere.
- Only use the power supply unit supplied with the device.
- The power supply unit must be easily accessible to enable the electric separation of the
device from the network.
- If the antenna is to be wall-mounted, fi x as shown in fi gure 3.
- The product complies with directive 2011/65/CE concerning restrictions on the use of
hazardous substance (RoHS II) in electric and electronic equipment.
- The product complies with the new low voltage (LVD) directive 2006/95/EC, the EMC
directive 2004/108/CE and the ErP directive 2009/125/CE.