PR
EL
IMI
NA
RY
SW71122
MLX71122 RF Receiver
Programming Software Manual
39011 71122 01
Page 6 of 21
SW71122-Manual
Rev. 004
Aug/11
We recommend creating the icon of the main program on your PC’s desktop to easily access the program.
The working directory folder of the link should be set to the installation folder.
4
Using the Software
4.1 Software Start Up
Please make sure the evaluation board EVB71122 and the USB-SPI converter (or the LPT cable) are con-
nected to the PC. This ensures that the software automatically detects whether the USB or the LPT port are
used.
The software can be started by double clicking on the main program icon in the installation directory or by
double clicking on the link. During start-up the software reads out the corresponding init-file and restores all
settings that were active when the software was regularly closed the last time.
A typical first menu view of the program is shown in the figure above. The program starts up with the tab
Mode Control
activated.
Data is only sent to the IC if the
Send to IC
button is pressed or
Send always
is activated.
