Meler MV, Инструкция по эксплуатации

Страница: 13 / 32

INSTALLATION
3-1
MA-5096-E MV APPLICATOR MANUAL
3. INSTALLATION
Warning: The manual MV applicator is installed in equipment with state-
of-the-art technologies and with certain foreseeable risks. Therefore, only
qualified personnel with sufficient training and experience should be allowed
to use, install or repair this equipment.
Unpacking
Before installing the manual applicator, it should be removed from the
packaging and inspected to detect any possible deterioration or damage.
Notify your Meler Representative or the Main Office of any defect, even to the
outer packaging.
Introduction
The manual MV applicator is supplied with the necessary elements for its
installation and use. However, some components may have to be supplied by
the user, depending on each specific installation:
• Air tube diameter 6 mm.
• Support or metal wire to keep the applicator suspended at all times.
Installation of the applicator
Hose diameter 8 mm
Before installing the MV applicator, make sure that the site intended for
installation allows obstacle-free placement, connection and use of the entire
system.
Take the following steps for proper installation of the applicator::