GD-5510-01
Instructions Manual
10.Specifications
10-1.General Specifications
Single-phase 100-115V(50/60Hz) *1
●Rated power at DRIVE: 420VA〔POWER SEL ⇒ HP,H set up〕*2
●Rated power at HOLD: 30VA〔HOLD I.SEL ⇒ 40% set up〕
●DRIVE CURRENT
0.17A/phase~0.68A/phase (16 levels)
●HOLD CURRENT
10%~100% of DRIVE CURRENT (10 levels)
●DRIVE CURRENT
0.34A/phase~1.35A/phase (16 levels)
●HOLD CURRENT
10%~100% of DRIVE CURRENT (10 levels)
●Drive pulse input
(CW, CCW)
Photo-coupler input
●Motor excitation stop input
(M.F)
Photo-coupler input
●Step angle switch input
(C.S)
Photo-coupler input
●Phase signal output
(P.O)
O/C output
●Overheat alarm signal output
(O.H.A)
O/C output
●MOTOR selection
(MOTOR SEL)
●HIGH-SPEED POWER selection
(POWER SEL)
●HOLD CURRENT selection
(HOLD I.SEL)
●DRIVE CURRENT selection
(DRIVE I.SEL)
●STEP ANGLE selection
(STEP SEL)
●HOLD SWITCHING TIME selection
(DHT SEL)
●ROTATE CHARACTERISTIC selection
(RC SEL)
●PULSE INPUT TYPE selection
(SPI SEL)
Indoor (Exposure to direct sunshine is not allowed.)
Without any explosive, corrosive or inflammable gas, oil mist, or dust
(At ordinary temperature and humidity)
*1
Input voltage range is single-phase 100-115V±10%.
*2
Power demand varies with rotation speed, a load, etc.
*3
Including screws and terminal blocks.
500VDC: 100MΩ or more
(No freezing allowed)
(No condensation allowed)
No abnormality should be found after a vibration test
at 10~55Hz, 0.15mm P-P.
AC terminal - signal terminal
Storing Temperature
Storing Humidity
Atmosphere
(No freezing allowed)
Input Signal
Output Signal
Function of Operating
Sections
Operating Ambient
Temperature
1500VAC: for one minute
(No condensation allowed)
Weight
0℃ ~ +40℃
80%RH or less
-10℃ ~ +55℃
80%RH or less
H
134.5 ×
W
140 ×
D
64 (mm) *3
0.8 kg
1500VAC: for one minute
500VDC: 100MΩ or more
Inputting
100VAC
Exterior Dimensions
Motor output current
Insulated
Withstanding Voltage
Insulation Resistance
MOTOR SEL switch
is set to [5L]
MOTOR SEL switch
is set to [10L]
Operating Ambient
Humidity
Withstanding
Vibration
Supply Power
-32-