Instructions Manual
6.Connection
6-1.Overview of Connection Configuration
DC Power Supply
0V(GND)
DC+24V
User
DB-2310/B32
Controller
Twisted
J2 2 1
J3 6 5 4 3 2 1
pair wire
J1
CWP
CW+
CWP
CW-
CCWP
CCW+
CCWP
CCW-
+COM
M.F+
M.F
M.F-
(N.C)
(N.C)
●Connect only one motor to one driver.
●Do not power ON/OFF by the relay etc. in the output side of the DC power supply.
●Use twisted pair wire for the CW/CCW input signal line.
●Provide shielding for the signal line where considerable noise is generated.
●Use the wire material of the characteristic that is difficult to burn.
●Provide shielding for the motor line if it generates significant noise.
●Use the DC power supply that was reinforced insulation between primary-side
and secondary-side.
〔Example configuration〕
The metallic enclosure and shielded wires work to shield noise.
Metal Enclosure
Metal Enclosure
Metal Enclosure
User
Controller
DB-231O
1
2
3
4
5
6
7
8
Motor
DC-
DC+
MOTOR
Shield
Shield
Grounding
Grounding
Grounding
(N.C)
(N.C)
B
B
A
A
-21-