46
Chapter 3 Advanced Usage
3
Press the Up/Down buttons (
) and select “Check for Updates at Start-Up”, then press the Menu/Enter
button (
).
4
Press the Up/Down buttons (
) and select “No”, then press the Menu/Enter button (
).
5
Press the Menu/Enter button (
).
Restoring Factory Defaults
To initialize the N10/N100 to its factory default settings, follow the procedure below. The operation above only
initializes the settings. Data will not be affected.
1
Turn off the N10/N100.
2
Turn on the N10/N100 while pressing the Down button (
). After the “MELCO” logo disappears, let go of the
Down button (
).
3
Press the Up/Down buttons (
) and select “OK”, then press the Menu/Enter button (
).
