2
Press the Down button (
) and select "System Update", then press the Menu/Enter button (
).
3
Press the Down button (
) and select "Check for Updates at Start-Up", then press the Menu/Enter button (
).
4
Press the Down button (
) and select "Yes", then press the Menu/Enter button (
).
Enabling the firmware check is finished. The unit will check for new firmware releases on the next startup.
Restoring Factory Defaults
To initialize the N1 to its factory default settings, follow the procedure below. The operation above only initializes
the settings. Data will not be affected.
1
Turn off the N1.
2
Turn on the N1 while pressing the Down button (
). After the "MELCO" logo disappears, let go of the Down
button (
). The setting initialization screen will be displayed.
If you go to
Settings
-
Initialize Settings
on the display panel, the same screen will be displayed.
49
