6
9
GND
Grounding terminal.
10
USB 3.0
*
For importing music files from compatible USB devices.
11
EXPANSION
*, **
Connect a compatible USB hard drive or USB flash drive to expand the storage capacity for audio streaming.
12
BACKUP
*, **
Connect a compatible USB hard drive here to back up or restore the contents or settings of the HA-N1.
13
LAN
***
Use an Ethernet cable to connect this port to a wireless router, hub, or switch on your network. Then you will
be able to access the HA-N1 from computers and mobile devices on your network.
14
PLAYER
***
This is a dedicated port for Network Audio Players. Use an Ethernet cable to connect this port directly to a
Network Audio Player or AV receiver.
Note:
If your Network Audio Player is directly connected to the player port, it will not be visible on the network
when the HA-N1 is powered off. If this is an issue, connect your Network Audio Player to the router or switch
instead.
15
AC IN
Use the power cable.
16
DC 5V OUT
USB power port (500 mA). Not for data transfer.
Notes:
*The first partition of a connected USB device is mounted. Additional partitions are not recognized.
To recognize the whole capacity, connect the USB device to "EXPANSION" or "BACKUP" port, navigate to
Settings
-
Drive
, select
Format Expansion Drive
or
Format Backup Drive
, and select
Erase All Data
to format all partitions.
Please note that all data will be removed with this operation.
**Do not disconnect the external USB drive while the HA-N1 is on. You must turn off the HA-N1 first, then
disconnect the drive.
***When the Ethernet cable is connected to the network, the link LED will glow. The act LED shows network
activity. On the front display panel, go to
Settings
-
Rear Side LED
and set to "Off" to extinguish both LEDs.
