manualshive.com logo in svg

Melco Fast Clamp, Настройка, сборка и регулировка

Поделиться
Скачать
Melco Fast Clamp Скачать руководство пользователя страница 2

 

34877 Rev. B 

2 of 8 

Melco Fast Clamp Instructions 

 

 

The Melco Fast Clamp is a versatile clamping system for your embroidery machine. This document will walk you 
through the initial setup and assembly process, as well as installation and adjustment on your machine. Videos for 
installation as well as support files are found at 

www.melco-service.com/melcofastclamp.html

 

I. 

Overview 

1.  Clamp Arm Assembly Thumb Screws to adjust 

embroidery field size in x-axis (left/right) 

2.  Clamp Arm position indicators on the Interface 

Bracket (indicate embroidery field size in X) 

  Match hoop size settings in the machine 

Operating System (OS) software 

3.  Upper Clamp Arm Height Adjustment Thumb 

Screw 

4.  Upper Clamp Arm  
5.  Lower Clamp Arm 
6.  Lower Clamp Arm Release Screw 
7.  Lever for opening and closing Upper Clamp Arms 

X-Axis Embroidery Field Adjustment 

Loosen the Clamp Arm Assembly Thumb Screws (1) just enough to allow the Sliding Blocks to move left/right. The 
Sliding Blocks will click into place at designated intervals on the Interface Bracket. The position indicator numbers 
(2) are the same on the left and right side of the Interface Bracket so that the machine Operating System software 
(OS) hoop limits will work correctly. 

The position indicator numbers (2) on the Interface Bracket indicate embroidery field size in centimeters and the 
same number must be chosen in the machine Operating System software (OS) hoop list. If the OS displays the 
hoops in inches, go to Tools>Options>Measurement Units to change the Hoops to cm. 

 

 

Embroidery Field Width Indicator Marks 

The Clamp Arm position indicators (2) on the Interface Bracket indicate the effective embroidery field in X (width of 
the embroidery design). The Clamp Arms should always be set as close as possible to the minimum embroidery 
field for the design to be embroidered. 

Special application: If, for example, the embroidery media is a dog collar and the design or text to be 
embroidered on that dog collar is long, we suggest that the text be divided into two designs. This helps reduce 
registration issues or bowing of the media during the embroidery process. 

 

 

 

1 

1 

2 

7 

3 

4 

6 

5 

2 

1 

1 

Содержание Fast Clamp









Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды