2. Take the right and left side of control panel and press it onto switching base. Remember
always take the right and left side of control panel for installing. Do not use UP and
BOTTOM side.
RESET
When reset needed, take the right and left side of control panel and pull it out. Take 1 or 2
batteries of it and Wait about 1 minute. Then press the batteries back.
WIRING
SPECIFICATIONS
Power Rate: 230V 50Hz 8A Resistive Load
Thermal Rate:
Measurement Temperature Range: 0’C to 35’C
Setting Temperature Range: 5’C to 30’C
Power: 2 x AA Alkaline Battery Operated (not included).
