limit the length of the wiring as much as possible, in order
to minimize the chances of intercepting radioelectric inter-
ference.
BLUETOOTH SOURCE PAIRING
Once the installation has been completed, it is possible to start the
recognition procedure via Bluetooth between the amplifier and the
source to be used via a wireless connection, typically a smartpho
-
ne or tablet. Proceed as follows:
•
Press the INPUT button on the front of the device several
times until the word "bt" flashes on the display.
•
On the source, start searching for available Bluetooth devi
-
ces.
•
Select the device “MK-120SAS”
•
Wait a few moments until the amplifier releases the con
-
nection jingle.
•
Verify the complete association by checking that the messa
-
ge “bt” on the display has stopped flashing.
•
Start audio playback using the relevant app on your mobile
device.
•
If, after one minute, the association has not been succes
-
sful, therefore the connection jingle has not been heard and
the association has also failed on the source, switch the
amplifier off and on again, restart the mobile device and
repeat the procedure from the beginning.
•
Once the first pairing has been made, the mobile device
should connect to the amplifier automatically if within the
surrounding range of about 10 meters, as long as the “bt”
input is selected.
CARE AND MAINTENANCE
The product does not require any maintenance. For periodic clea
-
ning, use a soft slightly damp cloth, taking care to disconnect the
power from the socket. Avoid any aggressive detergent or abrasive
sponges, as the front made of polymeric material could be scra
-
tched or stained irreparably. For periodic cleaning of the rear ven
-
Содержание 550111011
Страница 2: ......
