Melchioni 550111011, Руководство пользователя

Страница: 17 / 28

reference.
• Before proceeding with the installation, check the integrity of the
appliance and the power cable; if missing or damaged compo -
nents are detected, such as deformation, destructuring, breaka -
ge of parts, shaking noise or the like, immediately contact the
retailer for complete replacement.
•
The product is not water resistant; it is therefore necessary to
install it in a dry place, away from taps, pipes, containers, accu -
mulation and expansion vessels, sprinklers, fountains, hydran -
ts, sprinklers, condensate evacuation lines and the like. Do not
place any water containers or objects that could release water
(eg flower vases) near or above the appliance.
•
Do not expose the product to direct sunlight.
•
The product must be installed in a well-ventilated place.
•
Should the product show swellings, cracks, breakage of the
container, emission of smoke, vapors, bad smell or unusual
sounds, excessive heating, detachment of parts and other si -
milar situations, immediately disconnect the power supply from
the electrical panel, then disconnect the appliance from the sy -
stem and contact qualified technical personnel.
• Should the product be in the vicinity of children or people with
reduced physical, motor and / or intellectual abilities, adequate
supervision must be assured.
•
The installation must be carried out by trained technical per -
sonnel: an installation in non-compliance with the requirements
relating to the correctness of the connections, could lead to a
reduction in performance to early damage to the product, up to
a potential danger to the operator’s safety.
•
The product must be connected to an electrical system that
complies with the relevant technical standards in force.
•
Before installation, check that the mains voltage is compatible
with the characteristics shown on the power transformer label.
•
The product must be installed on a suitable surface, free from
roughness, capable of ensuring acceptable stability and good
fixing of the feet. The passage of the cables must be easy and
must not affect the stability of the appliance and the correct air
exchange flows.
•
If the product is integrated into existing systems, make sure that
its installation does not prejudice the validity of the relevant cer -
tifications: carry out all updates resulting from the use of the