4 Settings and adjustment
16
4 Settings and adjustment
Settings on the steam sterilizer
Date and time
Check the date and time and set if necessary: consult the user manual.
Feed water inflow
The feed water supply is effected either via the internal storage tank or via a separate water treatment unit
(e.g. MELAdem 40/MELAdem 47). Setup the feed water inflow depending on the installation version
IN-
TERNAL
or
EXTERNAL
.
Further information is provided in the device user manual.
Additional program options
The
Autom. preheating
function heats the steam sterilizer chamber to a preheating temperature of
the respective program before program start, or holds this temperature between two program runs. This
will shorten the cycle times. It also reduces condensate formation on the chamber wall.
The
Additional drying
function increases the program by 50 % for difficult drying tasks.
Further information is provided in the device user manual.
Counter stands
Working in the
SETUP menu
menu, you can access counter stands and other technical data of the steam
sterilizer.
