MEITRACK T399 Bluetooth Vehicle Tracker User Guide
Copyright © Meitrack Group 2021. All rights reserved. - 7 -
⚫
Smart power-saving mode
⚫
Built-in 3-axis accelerometer
⚫
Online Parameter Editor (only for the MS03 platform)
⚫
GPS data filtering
⚫
Set the output port status based on events
⚫
Stop Moving and Start Moving alerts
⚫
Vehicle power protection
⚫
Idling alert
⚫
AGPS
⚫
Internal Bluetooth module
⚫
Support a CAN bus interface(Optional)
3.1.4
Functions of Optional Accessories
Accessory
Description
iButton reader and iButton key
Identify the driver ID and grant permission to start the vehicle.
A53 fuel level sensor
Check the fuel level and detect a fuel theft alert.
Wired digital temperature sensor
Check temperature. (At most eight wired temperature sensors
are supported, and a sensor must be connected to the A61
sensor box.)
400 mAh/3.7 V high temperature resistant
battery (-5°C to 75°C)
The device can continuously work after the external power
supply is cut off.
When the battery power is low, a low battery alert will be sent.
Bluetooth temperature and humidity sensor
Check temperature (-20°C to 55°C) and humidity (0% to 100%
RH). (A maximum of four Bluetooth temperature and humidity
sensors are supported.)
Bluetooth beacon
Detect the location of the tracker or Bluetooth beacon. (A
maximum of 16 Bluetooth beacons are supported.)
3.2
Product Specifications
Item
Specifications
Dimension
80.5 mm x 60 mm x 23.5 mm
Weight
100g
I/O power cable length
50 cm
Power supply
DC 11.4
–
90 V/1.5 A
Battery
Internal 400 mAh battery (normal temperature resistant: -20°C to 60°C)
Power consumption
Current in standby mode: 65 mA
Operating temperature
-35°C to 80°C (for the device without a battery)
-5°C to 75°C (for the device with a high temperature resistant battery)
Operating humidity
5%
–
95%
LED indicator
Green LED indicator showing the GSM signal
Blue LED indicator showing the GPS signal
Button/Switch
1 upgrade button (used to manually upgrade the firmware)
1 power button