Operating instructions
On/Off
Press the [MODE] button to switch between modes:
“Cool”………………… Cooling
“Heat”………………… Heating
“Cool” & “Heat”……… *Auto mode
“Fan”…………………. Fan only
* The Auto mode can be disabled by technician.
* The active mode will flash during demand for cooling or heating.
Press the [ON-OFF] button to turn the thermostat ON or OFF.
“ON” or “OFF” will appear on display.
Modes
Set point
Press the [+] or [-] button – “SET” and the set point
temperature will appear on display.
Adjust using the [+] and [-] buttons.
Cool
Heat
Auto mode
Fan only
Auto
High
Medium
Low
FMHC220-VFS-FC-MDB-01
Owner’s manual & Technician Settings
Tel: +972-3-9626462
Fax: +972-3-9626620
www.meitavtec.com | [email protected]
ON
o
C
SET
Cool
Lo
Heat
Cool
Heat
Fan
Set point
OFF
OFF
ON
Press the [FAN] button to switch between fan speeds:
“FanLo”…………….… Low speed
“FanMe”……………… Medium speed
“FanHi”………………..High speed
“A.Speed”………….… Auto speed
*The active speed will flash.
Fan speeds
Me
Hi
Hi
Me
Lo
Press and hold the [FAN] button (10 seconds) to select *Auto fan
configuration:
“Fan” flashes on display………….*Fan cycles on with demand
“Fan” does not flash……………….Fan is on continuously
* The Auto fan function can be disabled by technician.
Auto fan
Always
ON
On with
demand
Fan
