4
2. Options and Accessories
•
External or internal sensor (Meitav-tec type).
•
Hand held remote control (RT-03)
•
Manual cool/heat or Auto-change (dead band)
•
Manual = 1 valve = one output for cool and heat.
•
Auto-change = 2 valve = 2 outputs (one cool/one heat)
•
Display for ambient temp. YES or NOT.
•
Set point limits with password
•
Option NO VALVES - thermostat work ONLY on the fan.
For details on where to purchase accessories, please contact Meitav-tec for you’re
nearest location or visit our web site at www.meitavtec.com
3. Installation Instructions
It is very important to find the right place to install the Flush Mount unit.
Please make sure to follow all the installation instructions in order to get an
accurate reading of the temperature.
General points to follow:
•
The unit MUST be fitted into a standard electrical box (Gewiss Box - GW00001481VR)
•
The unit should not be installed on an outside wall or where there is an air draft.
•
The unit must not be exposed to a direct sunlight.
•
The standard height to install this unit is 1.5 meter from the floor (5 feet).
