4
6. Technician Settings
6.1 Proportional output selection 0÷10Vdc or 2÷10Vdc
•
Press and hold (5 sec.) the MODE button - “0” will
appear on display.
•
Using the “+” button, change the scale to 2÷10Vdc
“2” will appear on display.
•
Using the “-” button, change the scale to 0÷10Vdc
“0” will appear on display.
•
Press the MODE button again to return to normal
display mode.
(In the picture – the scale was 2÷10Vdc and changed to 0÷10Vdc)
7. Operating manual
7.1
Turn the thermostat on
•
Press the ON button to activate the thermostat - The
word "ON" will appear on the display.
7.2 Turn the thermostat off
•
Press the OFF button to deactivate the thermostat -
The word “OFF” will appear on the display.
7.3 Temperature set-point adjustment
•
Press the “+” or “-” buttons - the set-point
temperature will flash and “COOL” and “SET” will
appear on display.
•
Adjust the cooling set-point temperature using the
“+” or “-” buttons.
7.4 Select modes
•
Press the MODE button to switch between the
different modes:
o
Cool – “Cool” will appear on display.
o
Heat – “Heat” will appear on display.
On
Off
Mode
OFF
o
C
On
Off
Mode
ON
o
C
On
Off
Mode
o
C
ON
Set
Cool
On
Off
Mode
ON
o
C
Set
Cool
On
Off
Mode
o
C
ON
Cool
On
Off
Mode
o
C
ON
Heat
On
Off
Mode
On
Off
Mode
