11. Countdown function CD
1. While the timer is at clock display status, press
—
, to set countdown program.
The
CD
sign will be shown in the display.
2. Press
SET
button once, either
ON
or
OFF
will begin to flash, press
PROG/+
or
—
button to select countdown
ON
or
OFF
mode. If
ON
is selected, the timer will be
ON
during the countdown period, then it will turn
OFF
after the countdown expi-
res. If
OFF
is selected the timer will be
OFF
during the countdown and switches
to
ON
after the countdown expires.
3. Press
SET
button again to advance to the hour setting, the
HOUR
will begin to
flash, press
PROG/+
or
—
button to select hour for countdown. (from 0 to 99
hours).
4. Press
SET
button again to advance to the minute setting, the
MINUTE
will begin
to flash, press
PROG/+
or
—
button to select minute for countdown. (from 0 to
59 minutes).
5. Press
SET
button again to advance to the second setting, the
SECOND
will begin
to flash, press
PROG/+
or
—
button to select second for countdown. (from 0 to
59 seconds).
6. Press the
SET
button one more time to complete this countdown setting.
7. Press
CD
button once, this countdown program is activated. (Press
CD
button
once again, this countdown program will stop and recovery this countdown time
what time you set.
8. The
CD
will flash in the screen when press
CD
button in clock mode. It means the
countdown function is executed.
12. 12/24 hour mode
Press
CD
button and
SET
button simultaneously to turn the time between 12 and
24 hour mode.
13. Summer time
Press
SET
button and
MANUAL
button simultaneously. Display shows S (Summer
time), clock advances 1 hour.
To revert the winter setting, press the two buttons again. Clock moves backward 1
hour.
S
disappears in display.
14. Operation priority (from the highest to the lowest)
Please notice the operation priotity when you use the timer:
1. MANUAL ON
or
MANUAL OFF
2. RANDOM
3. CD
4. PROGRAM.
It executes the
MANUAL ON
or
MANUAL OFF
setting first,
RANDOM
setting second,
CD
setting third and
PROGRAM
setting last when the timer runs. Please set the
right operation mode.
Note: Please make sure the current operation mode is in
AUTO
mode. The
RANDOM
function is disabled.
