7. Setting the current time
1. Press the buttons
PROG/+
or
—
until the
CLOCK
displays in LCD.
2. Press and hold the
SET
button for 2-3 seconds until
MO
will begin to flash, press
PROG/+
or
—
button to select the day of the week.
3. Press
SET
button again to advance the hour setting. The
HOUR
will begin to flash,
press the buttons
PROG/+
or
—
to select the current hour.
4. Press
SET
button again to advance the minute setting. The
MINUTE
will begin to
flash, press the buttons
PROG/+
or
—
to select the current minute.
5. Press
SET
button one more time to complete the setup.
6. To reset current time, repeat steps 1 – 5.
8. Setting the timer programmes
1. While the timer is at clock display status, press
PROG/+
button once to display
the first
ON
setting, display shows
1
ON
--:--
2. Press
SET
button once, the
MO
will begin to flash. Press
PROG/+
or
—
to select
the day of the week or combination of days for program 1.
3. Press
SET
button again, the
HOUR
will begin to flash. Press
PROG/+
or
—
to
select the
ON
hour for program 1.
4. Press
SET
button again, the
MINUTE
will begin to flash. Press
PROG/+
or
—
to
select the
ON
minute for program 1.
5. Press
SET
button one more time to complete the program’s
ON
setting for
program 1.
6. Press
PROG/+
button again to advance to the first
OFF
setting, display shows
1
OFF
--:--
7. Repeat the steps 2 – 5 to create the OFF setting.
8. If necessary, repeat the steps 1 – 7 for additional 9 ON/OFF-programmes.
9. Press
PROG/+
and
—
button simultaneously to exit program setting mode and
come back CLOCK mode.
a. To disable a timer program or enable a disabled program again, press the
PROG/+
button until the desired program is shown in the display. You can now
enable or disable the timer program by using the
MANUAL
button. The display
shows --:--
b. Check your programs ensure that the settings do not overlap. If program settings
are overlapped, the timer
ON
or
OFF
will be executed according to program time,
not by program number. Program
OFF
has the priority over program
ON
.
c. If you want to activate programs, please make sure the timer must be in
AUTO
mode, and the
RANDOM
and
CD
functions are disabled.
Note: Please note that the days of the week for switching on and off must be con-
figured separately. The selected combination is not automatically adopted for the
entire timer program.
