22
Using your Hob
To start cooking
1. After the hob be connected to electricity and power on.
Press and hold the ON/OFF control button for
about 3 seconds till you hear a “beep” to turn the
hob on.
Now the hob enters into Standby mode, all heat
setting indicators and Timer setting indicators shows “-”
2. Place a suitable pan on the cooking zone you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
3.
Set heating level of cooking zone
1
）
For model
MV 1601/MI 1500:
• There is separate and heat level control button for each
cooking zone for these models. Set heat setting by touching the
or button for corresponding cooking zone.
• If press and hold either of the two buttons, the value will adjust
down or up rapidly, from 0 to 9 in circle.
2)
For other model, before adjust heating level, to touching
the heating zone selection control button to need select and
active the cooking zone you wish to use. The
heat setting indicator
of the selected zone flashing when
be active,
For Model:
Free cook/ MV 1613/ MI 1613,
then you could adjust
its heat level by adjust heat setting by sliding the slider control.
For Model:
MI 1302
• Set heat setting by touching the or button.
• If press and hold either of the two buttons, the value will
adjust down or up rapidly, from 0 to 9 in circle.
Notes:
1. After connect to electricity, when power on, the buzzer of hob beeps once,
all indicators light up for 1 second then go out.
2. When the hob in Standby mode, if there is no practice within 1 minute,
the electric hob will auto turn off, with buzzer beeps once.
3. To turn on hob, press the ON/OFF control button and hold on for about 3
seconds; To turn it off, just need to press ON/OFF button again.