Meinberg IMS-PIO180, Руководство пользователя

Страница: 10 / 20

4 Front Connectors IMS-PIO180
4.1 Status LEDs
Status Indicators
LED St: PIO status
LED In: Status of the backplane’s output signals
LED P: display for preset PPS
LED C: display for preset 10 MHz
Initialisation: LED St: blue until USB is configured
LED In - LED B: off until USB is
configured
USB is configured: LED St: blue
LED In:
0,5 sec. red -> 0,5 sec. yellow ->
0,5 sec. green -> 0,5 sec. off
Normal Operation: LED St. + LED In: green
LED P: green, if card is preset to PPS
LED C: green, if card is preset to 10 MHz
St In P C
4.2 In- Outputs (PPS or 10 MHz)
Technical Specifications:
Connections: 4 x BNC connectors, by software as
in- or outputs individually
switchable
Signal option: PPS or 10 MHz
(selectable via jumper)
Signal level: TTL
Impedance: 50 Ohm
Measuring accuracy: 5 ns (1 ns resolution)
IMS-PIO180 Setup Guide Date: 6th May 2020 7