Meinberg IMS-LNE-GBE-SFP, Руководство по установке

Страница: 10 / 15

4 LNE-GbE-SFP: Network Expansion with Gigabit Support for IMS Systems
4 LNE-GbE-SFP: Network Expansion with
Gigabit Support for IMS Systems
Key Features
- Four additional Network Ports
- Status LEDs
- Connector Type: SFP
- For longer distances: Singlemode Fiber: e.g. LX - 1310 nm (for distances up to 10 km)
Additional Network Interfaces Card with Gigabit Support and Fiber Optical Connectors
The module LNE-GbE-SFP extends a LANTIME NTP time server (IMS Systems) with four additional network
connections. The additional ports can be used to provide time synchronization to additional separate networks
or - by using a feature called "bonding" - to configure redundant network connections.
Characteristics
Status Info:
For each network connection
Interface: 1000BASE-T SFP
Duplex Modes: Half/Full/Autonegotiaton
Link speed: Electrical: 1000 Base-T
Fiber Optic 1000-FX
Cable: Copper Twisted Pair: e.g. CAT 5.0
Multimode Fiber: GI 50/125 µ m or
GI 62,5/125 µ m gradient fiber
Singlemode Fiber: E9/125
µ
m monomode fiber
Electrical Connectors: 96-pin VG-rail DIN 41612
Board type: Eurocard
Board dimensions: 160mm x 100mm , 1,5mm
Ambient Temperature: 0 ... 50
◦
C / 32 ... 122
◦
F
Humidity: Max. 85%
LED Indicators
LED St: Init lights blue during initialisation
LED In - LED B: Shows the state of the four LAN ports after initialisation
green normal operation
red defective LAN port
IMS-LNE-GBE-SFP Setup Guide Date: 26th February 2020 7