11.6.12.1 Configuration of Input Signals
Four fixed input signals (time code AM, time code DCLS, 10 MHz and PPS) can be supplied via the MRI
module to synchronize the system.
MRS prioritization
The provided input signals can be configured and monitored after the module is initialized.
MRS setting: selection and prioritization of the available input sources.
1. Open the
"Clock"
menu.
2. Open the submenu
"Status & configuration"
.
3. Select the respective clock module of the corresponding MRI module
4. Click on the tab "MRS settings".
5. Configure the reference signals shown in the priority list.
IRIG settings
Several time codes are available for selection for the IRIG reference signals of the MRI.
These are to be configured in the
"Status & Configuration"
submenu in the " IRIG Settings" tab.
Menü: Configuration of IRIG-Timecodes
82
Date: 28th May 2021
IMS - LANTIME M500
